| |
Welcome to the next level of subwoofer design. Using a new technology taken from the aerospace industry, our engineers have finally struck a balance between cone stiffness and musicality. These combined with advanced adhesives ando cone anchoring systems deliver the next level of performance ARC audio has become renownedfor. Smart engineering fuels the passion. |
|
| |
Harmonic distortion + noise |
Separation at 1kHz "A" weighted |
Signal to noise "A" weighted |
|
| 8V (0dB), 2V (10 dB) 700mV(20dB) |
|
|
|
|
| 50Hz, 125Hz, 315 Hz, 750Hz, 2.2kHz 6kHz 16khz |
|
|
|
|
| Front high pass 55Hz - 5.5KHz |
| Rear high , low pass or band pass 55Hz |
| 5.5KHz, subwoofer 55Hz-200hz |
| subsonic filter 15Hz-150Hz |
|
|
 |
This optional face plate can easily be installed on the XEQ and IDX to make a single DIN sizecontrol center putting all your control where you need it. Up front right under your finger tips. Enjoy proffesional level ofo control without leaing the drivers seat |
|
|
|
| 50Hz, 125Hz, 315 Hz, 750Hz, 2.2kHz 6kHz 16khz |
|
|
|
|
| 50Hz, 125Hz, 315 Hz, 750Hz, 2.2kHz 6kHz 16khz |
|
|
|
|
| 25Hz,31,5Hz,40Hz, 50Hz,63Hz |
| 1.2KHz,1.6KHz,2KHz,2.5KHz |
|
|
|
|
| High pass 50Hz-6KHz Low pass |
| 12 dB /octave butterworth |
|
|
|
|
| Front high pass 50Hz-8KHz |
| Rear High pass or band pass 50Hz-8KHz |
| 12 dB /octave butterworth |
|
|
|
|
