| |
|
| |
 |
 |
- Full Range Class D Design
- Compact Chassis design allows for flexiable installation into small areas
- 2 Channel stereo/bridgable configuration
- Phillips Technology Chip Based Class D Output Technology
- Designed by ARC Audio in-house engineering staff
- High frequency switching power supply allows for greater separation from audible listening frequencies increasing sound quality and lowering THD
- Input inductor power supply isolation protects from unwanted interference in AM/FM reception
- Extremely low voltage chip based soft turn on circuit
- High speed ultra low ESR output network
- Ultra Low ESR high capacity power supply storage bank
- Secondary dedicated Low ESR capacitor bank for output devices
- Optically isolated power supply allows for increased sound quality and lower THD ratings by isolating the power supply from the input stage.
- dual side FR4 coated PCB
- Embedded protection circuits including – Thermal Limit, Current Limit, Thermal Rollback DC Offset, Reverse Polarity, and Overvoltage
- Secondary side plate dual color Power/Protection LED
- Block style high grip termination blocks
- Concealed hidden mounting points for a visually screwless installation
- Illuminated (blue) terminal block insulators
- Illuminated Mono Chrome LCD light up logo display on top of amp
- Selectable Full Range/High Pass Variable 65Hz – 250Hz 12dB crossover
- 0/+6/+12 Db selectable bass boost
|
|
|
 |
 |
- Full Range Class D Design
- Compact Chassis design allows for flexiable installation into small areas
- Flexiable 2/3/4 Channel stereo/bridgable configuration
- Phillips Technology Chip Based Class D Output Technology
- Designed by ARC Audio in-house engineering staff
- High frequency switching power supply allows for greater separation from audible listening frequencies increasing sound quality and lowering THD
- Input inductor power supply isolation protects from unwanted interference in AM/FM reception
- Extremely low voltage chip based soft turn on circuit
- High speed ultra low ESR output network
- Ultra Low ESR high capacity power supply storage bank
- Secondary dedicated Low ESR capacitor bank for output devices
- Optically isolated power supply allows for increased sound quality and lower THD ratings by isolating the power supply from the input stage.
- dual side FR4 coated PCB
- Embedded protection circuits including – Thermal Limit, Current Limit, Thermal Rollback DC Offset, Reverse Polarity, and Overvoltage
- Secondary side plate dual color Power/Protection LED
- Block style high grip termination blocks
- Concealed hidden mounting points for a visually screwless installation
- Illuminated (blue) terminal block insulators
- Illuminated Mono Chrome LCD light up logo display on top of amp
- Selectable Full Range/High Pass Variable 65Hz – 250Hz 12dB Front and Rear Channel crossovers
- 0/+6/+12 Db selectable bass boost
- Fusing - 2 x 20 amp
|
| Power output RMS @ 4 ohms |
4 x 80 watts |
| Power output RMS @ 2 ohms |
4 x 120 watts |
| Power output RMS @ 4 ohms bridged |
2 x 240 watts |
| Transient Distortion (100 watts) |
<.07% |
| Frequency Response |
20Hz - 20 KHz |
| Signal to Noise Ratio |
>79dB |
| Bass Boost |
+12db@45Hz |
| Crossover (Butterworth) |
High (65Hz - 250Hz) / Low (50Hz - 250Hz) |
| Gain Range |
.25V - 4.0V |
| Size |
9 1/4" (L) x 7 1/8" (W) x 1 7/8" (H) |
|
|
 |
 |
- Full Range Class D Design
- 5 Channel all-in-one configuration for a single amp installation solution
- Phillips Technology Chip Based Class D Output Technology
- Designed by ARC Audio in-house engineering staff
- High frequency switching power supply allows for greater separation from audible listening frequencies increasing sound quality and lowering THD
- Input inductor power supply isolation protects from unwanted interference in AM/FM reception
- Extremely low voltage chip based soft turn on circuit
- High speed ultra low ESR output network
- Ultra Low ESR high capacity power supply storage bank
- Secondary dedicated Low ESR capacitor bank for output devices
- Optically isolated power supply allows for increased sound quality and lower THD ratings by isolating the power supply from the input stage.
- dual side FR4 coated PCB
- Embedded protection circuits including – Thermal Limit, Current Limit, Thermal Rollback DC Offset, Reverse Polarity, and Overvoltage
- Secondary side plate dual color Power/Protection LED
- Block style high grip termination blocks
- Concealed hidden mounting points for a visually screwless installation
- Illuminated (blue) terminal block insulators
- Illuminated Mono Chrome LCD light up logo display on top of amp
- Selectable Full Range/High Pass Variable 65Hz – 250Hz 12dB Front and Rear Channel crossovers
- Subwoofer channel 5 selectable input switch
- Includes a remote subwoofer level control
- Subwoofer channel 5 Variable Low Pass 12dB 50Hz – 250 Hz crossover
- Subwoofer channel 5 On/Off selectable 12dB bass boost
|
| Power output RMS @ 4 ohms |
4 x 80 watts / 1 x 200 Watts |
| Power output RMS @ 2 ohms |
4 x 100 watts / 2 ohms not recommended on sub output |
| Power output RMS @ 4 ohms bridged |
2 x 200 watts channel 1-4 bridged |
| Transient Distortion (100 watts) |
<.08% |
| Frequency Response |
20Hz - 20 KHz |
| Signal to Noise Ratio |
>79dB |
| Bass Boost |
+12db@45Hz |
| Crossover (Butterworth) |
High (65Hz - 250Hz) / Low (50Hz - 250Hz) |
| Gain Range |
.25V - 4.0V |
| Size |
10 3/4" (L) x 7 1/8" (W) x 1 7/8" (H) |
|
|
 |
 |
- Frequency Limited Class D Mono Subwoofer Amplifier Design
- Compact Chassis design allows for flexiable installation into small areas
- Phillips Technology Chip Based Class D Output Technology
- Designed by ARC Audio in-house engineering staff
- High frequency switching power supply allows for greater separation from audible listening frequencies increasing sound quality and lowering THD
- Input inductor power supply isolation protects from unwanted interference in AM/FM reception
- Extremely low voltage chip based soft turn on circuit
- High speed ultra low ESR output network
- Ultra Low ESR high capacity power supply storage bank
- Secondary dedicated Low ESR capacitor bank for output devices
- Optically isolated power supply allows for increased sound quality and lower THD ratings by isolating the power supply from the input stage.
- dual side FR4 coated PCB
- Embedded protection circuits including – Thermal Limit, Current Limit, Thermal Rollback DC Offset, Reverse Polarity, and Overvoltage
- Secondary side plate dual color Power/Protection LED
- Block style high grip termination blocks
- Concealed hidden mounting points for a visually screwless installation
- Illuminated (blue) terminal block insulators
- Illuminated Mono Chrome LCD light up logo display on top of amp
- LowPass Variable 50Hz – 250Hz 12dB crossover
- Fully adjustable Bass boost w/ variable boost frequency and level
- Selectable 0/180 degree phase control
- Remote bass boost level control
- Variable frequency subsonic filter
|
| Power output RMS @ 4 ohms |
1 x 200 watts |
| Power output RMS @ 2 ohms |
1 x 340 watts |
| Power output RMS @ 1 ohm |
1 x 500 watts |
| Transient Distortion (100 watts) |
<.03% |
| Frequency Response |
20Hz - 250Hz |
| Signal to Noise Ratio |
>79dB |
| Bass Boost |
0dB - 18dB / 40hZ - 100hZ variable |
| Crossover (Butterworth) |
Low (50Hz - 250Hz) |
| Gain Range |
.25V - 4.0V |
| Subsonic Filter |
Variable (10Hz - 40Hz) |
| Size |
9 1/4" (L) x 7 1/8" (W) x 1 7/8" (H) |
|
|
|
|
